Description of CPD25 model basic weight parameters
Vehicle foundation weight composition
This 2.5-ton level counterweight electric forklift has a weight value in the conventional range of the same type of product. The weight distribution is mainly concentrated in the core blocks of the rear counterweight, power battery assembly, gantry and chassis structure. After reasonable adjustment, the weight distribution can ensure the lateral and longitudinal stability of the vehicle under the rated load, and avoid hidden dangers such as rolling during operation.
Self-weight floating range under different configurations
Depending on the height of the door frame selected by the customer, the type of attachments installed, and the capacity of the power battery, the vehicle's weight will fluctuate slightly. Before purchasing, you can confirm the actual weight data of the corresponding vehicle according to your own configuration requirements, which is convenient for planning the ground load-bearing requirements of the operation channel in advance and adapting to the load-bearing standards of the storage floor.
Description of core load parameters of CPD25 model
conventional load rating properties
The standard rated load of this model is 2.5 tons, and the corresponding load center distance is in the industry mainstream 500mm standard range, which means that when the center of gravity of the goods is within the specified load center position of the front end of the fork, the equipment can stably carry the nominal rated weight to meet the handling and stacking needs of the vast majority of small and medium-sized industrial goods and storage turnover boxes.
Load variation reference under different operating scenarios
When the lifting height of the gantry exceeds the maximum lifting height of the standard configuration, the corresponding safety bearing value will be reasonably lowered, and the operator needs to strictly refer to the load curve logo posted on the equipment fuselage to prohibit the handling of goods beyond the limit, so as to ensure the safety of the operation process and the service life of the equipment.
Practical tips for parameter adaptation to job scenarios
Matching Points of Self-Weight and Load Parameters
During daily use, the operator can calculate the overall ground pressure of the vehicle under full load in combination with the value of the vehicle's own weight, and confirm the load-bearing capacity of the ground, elevator, and loading and unloading platform in the operation area in advance to avoid accidents caused by exceeding the load-bearing limit of the facility. All parameters are measured reference values under the corresponding standard configuration. During actual use, the accurate values can be confirmed in combination with the factory instructions attached to the vehicle to adapt to their own handling needs.
