With its flexible operating characteristics, reach forklifts are widely used in narrow-channel storage scenarios. As a device suitable for medium and small load requirements, BYD R16P reach forklifts have attracted much attention to their parameters and operation adaptation data.
core performance parameters
Load and power index
The rated load of this forward forklift is 1.6 tons, which is suitable for the handling needs of most small and medium-sized goods. The power system adopts high-efficiency lithium battery configuration, and the battery life can meet the needs of regular 8-hour operation. Most of the power can be restored in a short time in fast charging mode, which is suitable for multi-shift operation scenarios. At the same time, the driving speed and lifting speed of the equipment meet the industry's conventional standards, taking into account operational efficiency and operational safety.
Basic size parameters
In terms of the basic size of the whole vehicle, the length (including the fork), width and height have been optimized, and the minimum turning radius is controlled within a reasonable range, which is convenient for steering operations in a narrow space. The length and width of the fork are also adapted to standard pallet specifications, and no additional adjustments are required to complete conventional cargo loading.
Door frame specification reference
Different door frame type parameters
According to the height requirements of different storage shelves, this forward forklift is equipped with a variety of door frames to choose from. The lifting height of the standard door frame can meet the operation of low-level shelves, and the closing height is low, which is suitable for low storage space; the lifting height of the secondary door frame is further increased, which is suitable for the stacking of middle-level shelves; the three-level door frame can realize the goods access of high-level shelves, but the closing height is increased accordingly, and the clear height conditions of the storage space need to be confirmed in advance. In addition, the forward and backward tilting angles of the door frame meet the operation safety specifications, which is convenient for the stable pick and place of goods.
Channel Width Reference
Job channel width adaptation
In the actual operation scenario, the channel width needs to be adjusted in combination with the tray specification and the type of the gantry. When using a standard 1200 * 1000mm pallet for right-angle stacking, the channel width corresponding to the conventional gantry needs to meet a reasonable value to ensure that the forklift completes the steering and stacking operations; if a narrow gantry is used or the operation mode is optimized, the channel width can be appropriately reduced, but the premise is to ensure the safety of the operation. At the same time, when working on high-rise gantries, the channel width needs to reserve enough space to avoid scratches between the gantry and the shelf.
