The first core part of this guidance focuses on pre-operation inspection before operators enter the narrow aisle high-level rack working area. All on-post operators must complete full pre-operation check before starting the reach truck, including confirming the remaining battery level of the electric reach truck, testing the lifting, tilting and walking functions are in normal condition, checking the fork surface for no deformation or crack, and confirming the surrounding aisle has no sundries obstructing the passage. Operators must wear required safety protective gears including safety helmet, non-slip work shoes before taking the post, and must not operate the reach truck with physical fatigue or under the influence of any alcohol or sedative drugs. If any abnormal condition of the equipment is found in pre-inspection, operators need to report to the management personnel immediately, and must not start the faulty equipment by force.
The second part states the standardized operation rules in high-level shelf loading and unloading process. When the reach truck enters the narrow aisle between high-level racks, the driving speed must be controlled below the safe specified value, keep a stable safety distance of more than 0.3m with the rack support and the goods stacked on adjacent layers, to avoid scratch the rack structure or knock down stacked goods. When lifting the goods to high storage positions, the operator must adjust the fork to keep the goods level, avoid rapid lifting or sudden tilting action, and confirm the position of the target storage layer is completely aligned before slowly placing the goods stably. It is strictly forbidden to carry over-limit overweight goods that exceed the rated load of the reach truck, and it is forbidden to stand under the lifted forks at any time.
The last part covers post-operation standard management requirements. After finishing the daily handling work, operators need to drive the reach truck to the designated parking area, lower the fork to the position 10cm to 15cm above the ground, cut off the power supply of the whole vehicle, and park the vehicle in a position that does not block the passage of other logistics equipment. All operators need to receive regular professional operation training, master the operation characteristics of electric reach trucks, and continuously optimize the operation efficiency of high-level rack storage scenarios. If you need more professional electric forklift operation guidance or related product consultation, you can contact Jianshu New Energy, which specializes in BYD electric forklift products, and send email to 17399989919@163.com for further communication.
